MPW-215 is a laboratory centrifuge. Its structure guarantees work and the wide range of applications in medical, veterinary, biochemical and others laboratories where constituents of investigated material are to be separated under the effect of centrifugical force.   ADVANTAGES: Maintenance - free, brushless drive motor Simple control system Time preselection up to 15 min. or continuous operation Short time of acceleration and deceleration time Speed preselection Digital LCD display of work time TECHNICAL DATA: Electric supply - 230 V  50/60 Hz  /  115 V 50/60 Hz Power consumption - 160 W Maximum capacity- 26,4 ml Speed - 100-13000 min -1 Maximum RCF - 16816 xg Time - 0-15 min ÷ ∞ Dimensions (WxDxH): 355 x 435 x 270 mm

MPW-223a is a modern table top laboratory centrifuge for column tests. It is applied in medical, biochemical and other laboratories, where constituents of investigated material are to be separated into components of different density under the effect of centrifugal force.   ADVANTAGES: Maintenance-free, brushless driver motor; Microprocessor controller provides preselection of speed, time and high repeatability of results; LCD display of actual parameters: speed, time and relative centrifugal force; Optimalization of acceleration and deceleration force; "Short" spinning function TECHNICAL DATA: Electric supply - 230 V  50/60 Hz  /  115 V  60 Hz Power consumption – 25 W Maximum capacity – 12 buckets for column tests Speed –1000 min -1 Maximum RCF – 85  xg Time range – 10 min Dimensions (WxDxH): 355 x 435 x 270 mm

MPW-223b is a modern table top laboratory centrifuge for implantology. It is applied in medical, biochemical and other laboratories, where constituents of investigated material are to be separated into components of different density under the effect of centrifugal force.   ADVANTAGES: Maintenance-free, brushless driver motor Microprocessor controller provides preselection of speed, time and high repeatability of results LCD display of actual parameters: speed, time and relative centrifugal force Optimalization of acceleration and deceleration force "Short" spinning function TECHNICAL DATA: Electric supply - 230 V  50/60 Hz  /  115 V  60 Hz Power consumption – 120 W Maximum capacity – 4 x 10ml Speed – 300 - 4000min -1 Maximum RCF – 2320 xg Time range – 1 - 99 min Dimensions (WxDxH): 355 x 435 x 270 mm

MPW-223c is a modern table top laboratory centrifuge for cytologic tests. It is applied in medical, biochemical and other laboratories, where constituents of investigated material are to be separated into components of different density under the effect of centrifugal force.   ADVANTAGES: Maintenance-free, brushless driver motor Microprocessor controller provides preselection of speed, time and high repeatability of results LCD display of actual parameters: speed, time and relative centrifugal force Optimalization of acceleration and deceleration force "Short" spinning function TECHNICAL DATA: Electric supply - 230 V  50/60 Hz  /  115 V  60 Hz Power consumption – 55 W Maximum capacity – 4 x cytoset 1,2 ml Speed – 300 - 2500min -1 Maximum RCF – 750 xg Time range – 1 - 99 min Dimensions (WxDxH): 355 x 435 x 270 mm

MPW-223e is a standard table top laboratory centrifuge. It is applied in medical, biochemical and other laboratories, where constituents of investigated material are to be separated into components of different density under the effect of centrifugal force.   ADVANTAGES: Maintenance-free, brushless driver motor Microprocessor controller provides preselection of speed, time and high repeatability of results LCD display of actual parameters: speed, time and relative centrifugal force Optimalization of acceleration and deceleration force "Short" spinning function TECHNICAL DATA: Electric supply - 230 V  50/60 Hz  /  115 V  60 Hz Power consumption – 120 W Maximum capacity – 500 ml Speed – 300 - 4000 min -1 Maximum RCF – 2320 xg Time range – 1 - 99 min Dimensions (WxDxH): 355 x 435 x 270 mm

MPW-251 is a universal  table top laboratory centrifuge. Its structure guarantees easy service, safe work and wide range of applications in medical, biochemical and other laboratories, where constituents of investigated material are to be separated into components of different density under the effect of centrifugal force.    ADVANTAGES: Maintenance-free, brush-less motor; LCD display Modern microprocessor controller provides: 99 operating programs Rotational speed or RCF preselection 1 sec. intervals adjustment for time preselection Time counting begins either when push button start is pressed or when rpm of the rotor reaches rotational speed set upin the program 10 acceleration and deceleration curves Spinning in "short" mode Automatic rotor indication Errors indication system unbalance improperly chosen rotor interuption of centrifuge Signals of failure in the power supply Monitoring and saving of working parameters through computer or directly by thermal printer with serial port Stainless steel chamber Effective ventilated ducts system Wide range of rotors and other accesories TECHNICAL DATA: Electric supply - 230 V  50/60 Hz  /  115 V  60 Hz Power consumption – 160 W Maximum capacity – 500 ml Speed range –18000 min -1 Maximum RCF – 24088  xg Time range – 0-99 min ÷ ∞ Dimensions (WxDxH): 355 x 435 x 270 mm

ADVANTAGES:• LCD Display • Maintenance-free, brushless motor • Modern microprocessor controller provides for: 99 operating programs; Preselection for rotational speedor RCF Time counting begins either when push bution start is pressed or when rpm of the rotor reaches rotational speed set up in the program Effective spinning time in minutes and seconds 10 acceleration and deceleration curves • Short spin button for quick spins • Automatic rotor indication • Signals of failure in the power supply • Output of RS 232 • Monitoring of programmed parameters during spinning • Monitoring and saving of working parameters through PC with centrifuge or directly by thermal printer with serial port • Stainless steel chamber • Efficient ventilated ducts system • Wide range of replaceable rotors and other equipments • Automatic opening of lid (option)   TECHNICAL DATA:   Electric supply: 230V, 50/60 Hz Power consumption: 200 WMaximum capacity: 500 ml Speed range: 100 - 18000 min -1 Maximum RCF: 24088  xg Time range: 0-99 min - ∞ Dimensions (WxDxH): 365 x 495 x 310 mm

ADVANTAGES:• LCD Display • Maintenance-free, brushless motor • Modern microprocessor controller provides for: 99 operating programs; Preselection for rotational speedor RCF Time counting begins either when push bution start is pressed or when rpm of the rotor reaches rotational speed set up in the program Effective spinning time in minutes and seconds 10 acceleration and deceleration curves Temperature adjustment • Short spin button for quick spins • Automatic rotor indication • Signals of failure in the power supply • Output of RS 232 • Monitoring of programmed parameters during spinning • Monitoring and saving of working parameters through PC with centrifuge or directly by thermal printer with serial port • Stainless steel chamber • Efficient ventilated ducts system • Precooling program with spinning or without it • Cooling program after finishing of spinning • Precise temperature stabilization • Wide range of replaceable rotors and other equipments • Automatic opening of lid (option),    TECHNICAL DATA:   Electric supply: 230V, 50 Power consumption: 450W Maximum capacity: 500 ml Speed range: 100 - 18000 min -1 Maximum RCF: 24088  xg Time range: 0-99 min - ∞ Dimensions (WxDxH): 365 x 655 x 310 mm

ADVANTAGES:• LCD Display • Maintenance-free, brushless motor • Modern microprocessor controller provides for: 99 operating programs; Preselection for rotational speedor RCF Time counting begins either when push bution start is pressed or when rpm of the rotor reaches rotational speed set up in the program Effective spinning time in minutes and seconds 10 acceleration and deceleration curves Temperature adjustment • Short spin button for quick spins • Automatic rotor indication • Signals of failure in the power supply • Output of RS 232 • Monitoring of programmed parameters during spinning • Monitoring and saving of working parameters through PC with centrifuge or directly by thermal printer with serial port • Stainless steel chamber • Efficient ventilated ducts system • Precooling program with spinning or without it • Cooling program after finishing of spinning • Precise temperature stabilization • Wide range of replaceable rotors and other equipments • Automatic opening of lid (option),    TECHNICAL DATA:   Electric supply: 230V, 50 Power consumption: 450W Maximum capacity: 500 ml Speed range: 100 - 18000 min -1 Maximum RCF: 24088  xg Time range: 0-99 min - ∞ Dimensions (WxDxH): 365 x 655 x 310 mm

ADVANTAGES: Maintenance-free, brushless drive motorLCD DisplayModern microprocessor controller provides for:99 operating programsPreselection for rotational speed or RCF1 sec. intervals adjustment for time preselectionTime counting begins when push button start is pressedor rpm of the rotor reaches rotational speed set up in the program10 acceleration and deceleration curvesShort spin button for quick spinsAutomatic rotor identificationErrors indication system:UnbalanceImproper chosen rotorInterruption centrifugation programSignals of failure in the power supplyMonitoring of programmed parameters during spinningOutput of RS 232Monitor and saving of working parameters troughout PC with centrifuge or directly by thermal printer with serial portEfficient ventilated ducts systemWide range of replaceable rotors and other equipmentAutomatic opening of lidProtection systems:It is not possible to open the lid during spinningIt is not possible to start when the lid is openTECHNICAL DATA: Electric supply - 230 V  50/60 Hz Power consumption - 500 W Maximum capacity- 1 litre Speed - 18000 min -1 Maximum RCF - 24000 xg Time - 0-99 min ÷ ∞ Dimensions (WxDxH): 430 x 530 x 420 mm

MPW 351e is modern, table top laboratory centrifuge. Its structure guarantees easy service, safe work  and the wide range of applications in medical, biochemical and others laboratories where constituents of investigated material are to be separated under the effect of centrifugal force. ADVANTAGES Maintenance-free brushless motor;Microprocessor controller provides for digital preselection of speed and timeLCD display shows actual parameters of work (speed, time and centrifugical force)Optimization of acceleration and deceleration timeSimple control system and ergonomic form Wide range of accessories “Short” spinning functionUnbalance protection system  TECHNICAL DATA  Electric supply - 230V 50/60 HzPower consumption - 320 WMax. capacity - 800 mlMax. speed - 4500 rpmMax. average RCF - 3305 xgTime - 1 – 99 minDimensions (WxDxH): 430 x 540 x 430 mm

ADVANTAGES: Maintenance-free, brushless drive motorLCD DisplayModern microprocessor controller provides for:99 operating programsPreselection for rotational speed or RCF1 sec. intervals adjustment for time preselectionTime counting begins when push button start is pressedor rpm of the rotor reaches rotational speed set up in the program10 acceleration and deceleration curvesShort spin button for quick spinsAutomatic rotor identificationErrors indication system:UnbalanceImproper chosen rotorInterruption centrifugation programSignals of failure in the power supplyMonitoring of programmed parameters during spinningOutput of RS 232Monitor and saving of working parameters troughout PC with centrifuge or directly by thermal printer with serial portPrecooling program with spinning orwithout itCooling programe after finishing of spinningPrecisely temperature stabilizationWide range of replaceable rotors and other equipmentAutomatic opening of lidProtection systems:It is not possible to open the lid during spinningIt is not possible to start when the lid is openTECHNICAL DATA: Electric supply - 230 V  50/60 Hz Power consumption - 500 W Maximum capacity- 1 litre Speed - 18000 min -1 Maximum RCF - 30065 xgTime - 0-99 min ÷ ∞Temperature Range: -20C to +40C Dimensions (WxDxH): 680x 530 x 420 mm

ADVANTAGES: Maintenance-free, brushless drive motorLCD DisplayModern microprocessor controller provides for:99 operating programsPreselection for rotational speed or RCF1 sec. intervals adjustment for time preselectionTime counting begins when push button start is pressedor rpm of the rotor reaches rotational speed set up in the program10 acceleration and deceleration curvesShort spin button for quick spinsAutomatic rotor identificationErrors indication system:UnbalanceImproper chosen rotorInterruption centrifugation programSignals of failure in the power supplyMonitoring of programmed parameters during spinningOutput of RS 232Monitor and saving of working parameters troughout PC with centrifuge or directly by thermal printer with serial portPrecooling program with spinning orwithout itCooling programe after finishing of spinningPrecisely temperature stabilizationWide range of replaceable rotors and other equipmentAutomatic opening of lidProtection systems:It is not possible to open the lid during spinningIt is not possible to start when the lid is openTECHNICAL DATA: Electric supply - 230 V  50/60 Hz Power consumption - 500 W Maximum capacity- 1 litre Speed - 18000 min -1 Maximum RCF - 350065 xgTime - 0-99 min ÷ ∞Temperature Range: -20C to +55C Dimensions (WxDxH): 680x 530 x 420 mm

ADVANTAGES: Maintenance-free, brushless drive motorLCD DisplayModern microprocessor controller provides for: 99 operating programsPreselection for rotational speed or RCF1 sec. intervals adjustment for time preselectionTime counting begins when push button start is pressed or rpm of the rotor reaches rotational speed set up in the program10 acceleration and deceleration curvesShort spin button for quick spinsAutomatic rotor identificationErrors indication system:UnbalanceImproper chosen rotorInterruption centrifugation programSignals of failure in the power supplyMonitoring of programmed parameters during spinningOutput of RS 232Monitor and saving of working parameters troughout PC with centrifuge or directly by thermal printer with serial portEfficient ventilated ducts systemPossibility of programming delay of the startPossibility of changing maximal radius of spinning with conversion into RCFPossibility of changing of density of spinning sample over 1,2 g/cm3 with automatic adjustment of maximum speedSelection of 20 exchangeable rotors and buckets from the offerAutomatic opening of lidProtection systems:It is not possible to open the lid during spinningIt is not possible to start when the lid is openTECHNICAL DATA: Electric supply - 230 V  50/60 Hz Power consumption - 750 W Maximum capacity- 1.6 litres Speed - 18000 min -1 Maximum RCF - 31150 xgTime - 5sec to 9h 59min ÷ ∞ Dimensions (WxDxH): 650 x 520 x 455 mm

ADVANTAGES: Maintenance-free, brushless drive motorLCD DisplayModern microprocessor controller provides for: 99 operating programsPreselection for rotational speed or RCF1 sec. intervals adjustment for time preselectionTime counting begins when push button start is pressed or rpm of the rotor reaches rotational speed set up in the program10 acceleration and deceleration curvesTemerature adjustmentShort spin button for quick spinsAutomatic rotor identificationErrors indication system:UnbalanceImproper chosen rotorInterruption centrifugation programSignals of failure in the power supplyMonitoring of programmed parameters during spinningOutput of RS 232Monitor and saving of working parameters troughout PC with centrifuge or directly by thermal printer with serial portPrecooling program with spinning orwithout itCooling programe after finishing of spinningPossibility of programming delay of the startPossibility of changing maximal radius of spinning with conversion into RCFPossibility of changing of density of spinning sample over 1,2 g/cm3 with automatic adjustment of maximum speedPrecisely temperature stabilizationSelection of 20 exchangeable rotors and buckets from the offerAutomatic opening of lidProtection systems:It is not possible to open the lid during spinningIt is not possible to start when the lid is openTECHNICAL DATA: Electric supply - 230 V  50/60 Hz Power consumption - 750 W Maximum capacity- 1.6 litres Speed - 18000 min -1 Maximum RCF - 31150 xgTime - 5sec to 9h 59min ÷ ∞Temperature Range: -20C to +40C Dimensions (WxDxH): 650 x 715 x 455 mm

MPW-54 is a small laboratory microcentrifuge. Its structure guarantees easy service, safe work and wide range of applications in medical, biochemical and other laboratories where it is necessary to separate small quantities of investigated material into components of different density. ADVANTAGES: Microprocessor controller of speed and time provides high repeatability of results Programming of rotational speed or RCF, time, characteristics of acceleration and  deceleration Digital LCD display of work time Optimization of acceleration and deceleration  TECHNICAL DATA: Electric supply - 230 V  50/60 Hz  /  115 V  50/60 Hz Power consumption – 60 W Maximum capacity – 90 ml Maximum speed – 3500/5800 min -1 Maximum RCF – 1137/3120 xg Time – 0-30 min ÷ ∞ Dimensions (WxDxH): 222 x 270 x 180 mm

MPW-55 is a laboratory microcentrifuge. Its structure guarantees easy service, safe work and wide range of applications in medical, biochemical and other laboratories where it is necessary to separate small quantities of investigated material into components of different density. ADVANTAGES: Microprocessor controller of speed and time provides high repeatability of results Programming of rotational speed or RCF, time, characteristics of acceleration and  deceleration Digital readout of set and actual parameters on LCD display Optimization of acceleration and deceleration Durable, Maintenance-free induction motor Digital readout Selection of 9 centrifuging programs Selection of 3 characteristics of acceleration and deceleration Spinning in "short" mode (time is controlled by pressing the push button) TECHNICAL DATA: Electric supply - 230 V  50/60 Hz  /  115 V  60 Hz Power consumption – 90 W Maximum capacity – 52,8 ml Maximum speed – 300-14000 min -1 Maximum RCF – 14234 xg Time – 0-99 min ÷ ∞ Dimensions (WxDxH): 220 x 270 x 180 mm

MPW-56 is a small laboratory centrifuge. Its structure guarantees work and the wide range of applications in medical, veterinary, biochemical and others laboratories where constituents of investigated materials are to be separated under the effect of centrifugical force.   ADVANTAGES: Small size with max capacity Maintenance-free, brushless drive motor Simple control system Time preselection up to 60 min. or continuous operation Short time of acceleration and deceleration time Speed preselection Optimization of acceleration and deceleration Digital LCD display of work time TECHNICAL DATA: Electric supply - 230 V  50/60 Hz  /  115 V 50/60 Hz Power consumption - 90 W Maximum capacity- 90 ml Speed - 100-6000 min -1 Maximum RCF - 3340 xg Time - 0-60 min ÷ ∞ Dimensions (WxDxH): 220 x 270 x 180 mm

MPW-65R is modern desktop laboratory refrigerated microcentrifuge. Its structure guarantees easy service, safe work and wide range of applications in medical, biochemical and other laboratories, where constituents of investigated material are to be separated into components of different density under the effect of centrifugal force. ADVANTAGES: Maintenance-free, brush-less drive motor Microprocessor control of spinning parameters provides high repeatability of results Programming of rotational speed or RCF, time, characteristics of acceleration and  deceleration LCD display of actual parameters Spinning in "short" Errors identification system Low interference level (Power Function Module) Ecological and efficient cooling system Pre-freezing mode provides stabilization of temperature before and after spinning Compressor overloading protection system Simple control system and ergonomic form Round carriers for tubes 0,4/0,2 ml or 0,5 ml are available Autoclavable rotors Full metal case and stainless chamber TECHNICAL DATA: Electric supply - 230 V  50/60 Hz  /  115 V  60 Hz Power consumption – 550 W Maximum capacity – 79,2 ml Maximum speed –14000 min -1 Maximum RCF – 20160 xg Time range – 0-99 min ÷ ∞ Temperature range – -20oC ÷ +40oC Refrigerant – ecological (CFC and HCFC free) Dimensions (WxDxH) : 298 x 564 x 280 mm